|
 |
2 way/1 way I.V. Cannula with wings.
|
 |
It is provided with low pressure injection
valve to facilitate
extra medication and to prevent its back
flow.
|
 |
Medicine can be injected by a syringe without
needle thereby reducing chances of infection
and preventing needle stick injuries. Cost
of needle is also saved.
|
 |
The valve is protected with easy to open Injection Port Cap.
|
 |
Coloured Injection Port Cap for size identification.
|
 |
It offers safe and convenient method of
atraumatic administration of medicines.
|
 |
Angled & grooved wings offer easy fixation
and prevent shifting & rolling of cannula
in the patient's body.
|
 |
Single
use, sterile, non-pyrogenic and nontoxic.
|

WINGS:
are made up of nontoxic,
medical-grade polypropylene compatible with
any medication. The injection port and the
receiving end of the wing have a 6% luer
taper as per ISO:594.
Incorporates a flash-back chamber in the
hub, blood stopper and luer lock cap.
NEEDLE: is made from cold rolled
stainless steel strip. The tip of the needle
has a short bevel 'back' cut point for easy
catheterisation and minimal pain and risk
of perforation.
PRECAUTIONS: before use, check the
integrity of the sealing.
WARNING:
do not use if the pack is previously opened
or damaged.
|
 |
| Colour
code |
Gauge
|
Catheter
Ext.
Diameter X Length
mm
|
Water
flow rate ml/min
|
Boxes
|
| Orange |
14G |
2.20X45 |
290 |
|
| Grey |
16G |
1.70
x 45 |
180 |
|
| White |
17G |
1.50X45 |
130 |
|
| Green |
18G |
1.20
x 38
1.20 x 45 |
90 |
|
| Pink |
20G |
1.00
x 32 |
57 |
|
| Blue |
22G |
0.80
x 25 |
33 |
|
| Yellow |
24G |
0.70
x 19 |
13 |
|
| Reference
: ISO:10555-1 |
|
|